Typical VSWR curve of the SE-220M Moxon antenna (RED Line) from 219 to 225 Mc.
SE-220M Moxon beam antenna shown mounted in vertical position.
Closeup of the SE-220M mount showing the stanard UHF Connector
SE-220M: 222 Mc. Moxon Beam Antenna
Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
The SE-220M, 222 Mc. Moxon Beam covers 219 to 225 Mc. at 1.5:1 or less VSWR. Covers 215 Mc. to 230
Mc. at 2:1 or less VSWR providing coverage above and below the 222 Mc. band. Heavy Duty construction that allows 120 MPH wind
survival with 1/2" radial ice. The SE-220M features a UHF Female connector standard. Constructed of aluminum, fiberglass,
UV resistant PVC, and stainless steel components for years of trouble free operation. The SE-220M can be mounted horizontally
for best CW/SSB operation, or it can be mounted vertically for FM operation, STANDARD. Can be used for VHF rover operation,
and strong enough to be used for permanent fixed station operation as well. May be stacked with a phasing harness for higher
gain (+3 dB) fixed station applications. Equipped with a SO-239 (UHF Female), or an optional Type-N connector.
SE-220M Moxon Horizontally Mounted
SE-220M Moxon Vertically Mounted
UV resistant PVC element mounting plates.
Specifications
Electrical:
Frequency:
Forward Gain:
Front-to-Back:
Maximum VSWR:
Power Limit:
Impedance:
Polarization:
Mechanical:
Boom
Length:
Assembled Weight:
Mounting Clamp:
SQ. Surface Area:
Cable Connector:
Wind Survival:
Element Width:
Element Depth:
Turning Radius:
Hardware:
Mounting
Clamps:
Screws and nuts:
Boom:
Elements:
219 Mc. to 225 Mc.
5.84dBi (3.7 dBd)
-22 dB (Horizontal)
-32 dB (Vertical)
1.3:1 (219 Mc. to 225 Mc.)
1.5KW PEP
50 ohms
Horizontal
or Vertical
15 inches
3.0 lbs
1" to 1.75" capacity
0.34 sq ft Horizontal
0.40 sq ft Vertical
SO-239 (UHF
Female), Type-N optional
120 MPH with 1/2" radial ice
19"
8"
13.5" Horizontal
12.0" Vertical
Zinc Plated
18-8 stainless steel
18"
x 1.5", 6061-T6 x 1/8" wall
3/8" & 1/2", 6063-T832 double drawn aluminum
$102.00
SE-220M-U, 222 Mc. Moxon with UHF connector
Plus S&H and any applicable state sales tax
SE-220M-N, 222 Mc. Moxon with Type-N connector
Plus S&H and any applicable state sales tax
4NEC2 calculated radiation pattern for the SE-220M
Left = Horizontal Azimuth Pattern
Right= Vertical Azimuth Pattern
© 2010 - 2022 - SAL Electronics, LLC, Algonquin, IL 60102
Fiberglass element spacers provide maximum insulation and mechanical support.
Heavy-Duty 1-1/2", 6061-T6 square aluminum boom.
SE-220M Moxon beam antenna in the horizontal mounted position.
SAL Electronics, LLC
The Antenna Store & More
Typical VSWR curve for SE-2MB antenna. VSWR bandwidth is less than 1.3:1 from 219 to 225 Mc.
VSWR sweep (RED Line) of the SE-220M Moxon beam antenna between 219 Mc. and 225 Mc.
Fiberglass filled ends to prevent moisture from entering, plus provides additional mechanical strength.
NO International orders accepted for this item.