SAL Electronics, LLC 

 

The SE-10H, 10-Meter Halo covers 28 to 28.9 Mc. at 1.5:1 or less VSWR, when tuned for 28.400 Mc.  Heavy Duty construction that allows 120 MPH wind survival with 1/2" radial ice.  Halo antennas are great for net control operators and for beacon operation, where an omni directional pattern of operation is desired to reduced the need to swing a directional array to make a contact.  The SE-10H is constructed of aluminum, fiberglass, UV resistant PVC, and stainless steel components for years of trouble free operation.  The SE-10H is designed to be mounted horizontally for CW/SSB operation, and is equipped with a direct DC ground for effective static dissapation.  Built for fixed station use, the SE-10H can also be used for portable or rover operation.  Mast mount is designed to accept sizes between 1" to 1.75" OD.  May be stacked with a phasing harness for higher gain (+3 dB) fixed station applications.  Equipped with a SO-239 (UHF Female), or an optional Type-N connector.

Frequency:

Gain:

Maximum VSWR:

Power Limit:

Impedance:

Polarization:

 

Boom Length:

Assembled Weight:

Mounting Clamp:

SQ. Surface Area:

Cable Connector:

Wind Survival:

Element Width:

Element Depth:

Turning Radius:

 

 

Mounting Clamps:

Screws and nuts:

Boom:

Elements:

28 Mc. to 29.7 Mc.

2.15 dBi (0 dBd)

1.5:1 (28.21 Mc. to 28.6 Mc.)  (360 Kc. Bandwidth)

1,500W PEP

50 ohms

Horizontal

 

 

52 inches

6.0 lbs

1" to 1.75" capacity

0.8 sq ft Horizontal

SO-239 (UHF Female), Type-N female optional

80 MPH with 1/2" radial ice

55.5"

50.5"

41.5" Horizontal

 

 

 

Zinc Plated

18-8 stainless steel

52" x 1", 6061-T6 x 1/8" wall

3/8" & 1/2", 6063-T832 double drawn aluminum

SE-10H-U, 10 Meter Halo Antenna, UHF Connector

Plus S&H and any applicable state sales tax

SE-10H-N, 10 Meter Halo Antenna, Type-N Connector

Plus S&H and any applicable state sales tax

© 2010 - 2022 - SAL Electronics, LLC, Algonquin, IL 60102

Valued features of the SE-10H Halo antenna design are: 
1) Twice the bandwidth of a single element construction.
2) Direct 50 ohm matching:  Means NO need for a matching network.
3) Direct 50 ohm matching:  Means NO detuning caused by rain or snow.
4) Design allows a single antenna to operate at full legal power (1.5KW PEP).
5) Direct DC Ground to help eliminate atmospheric noise buildup.
6) Mount that allows for 1" to 1.75" mast.
7) UHF connector standard, Type-N connector no charge option.
8) Simple tuning provided by varying the length of the two "U" shaped tuning elements locked in place with stainless steel hose clamps.

SAL Electronics Halo Antennas have a true DC ground design that gives a direct short from the connector center pin to the outer shield. This provides total grounding of both the center conductor and the outer shield that provides needed atmospheric static suppression. The common Gamma Match only provides grounding to the outer shield of the RF connector. The center connector will always show an open due the series capacitor feed.

No International orders accepted for this item