SE-6MB: 6 Meter Moxon Lite Beam Antenna
Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
The SE-6MB, 6-Meter Moxon Lite Beam covers 50 to 52 Mc. at 1.3:1 or less VSWR, and is field tunable for lowest VSWR; is a lighter
model for rooftop installations. Covers 50 Mc. to 54 Mc. at 1.3:1 or less VSWR providing coverage of FM frequencies as well.
Construction allows 120 MPH wind survival with 1/2" radial ice. The SE-6MB is available with an optional 1:1
Maxwell ferrite choke balun that provides blockage of RF down the transmission line. Constructed of aluminum, fiberglass, UV
resistant PVC, and stainless steel components for years of trouble free operation. The SE-6MB can be mounted horizontally for
best CW/SSB operation, or it can be mounted vertically for FM operation, STANDARD. Can be used for VHF rover operation, and
strong enough to be used for permanent fixed station operation as well. May be stacked with a phasing harness for higher gain
(+3 dB) fixed station applications. Equipped with a SO-239 (UHF Female) connector at the end of the choke balun.
SE-6MB Moxon Horizontally Mounted
SE-6MB Moxon Vertically Mounted
UV resistant PVC element mounting plates
1.75" mast clamp bolted to boom for horizontal or vertical mounting
© 2010 - 2022 - SAL Electronics, LLC, Algonquin, IL 60102
Specifications
Electrical:
Frequency:
Forward Gain:
Front-to-Back:
Maximum VSWR:
Power Limit:
Impedance:
Polarization:
Mechanical:
Boom
Length:
Assembled Weight:
Mounting Clamp:
SQ. Surface Area:
Cable Connector:
Wind Survival:
Element Width:
Element Depth:
Turning Radius:
Hardware:
Mounting
Clamps:
Screws and nuts:
Boom:
Elements:
Optional Balun:
50 Mc. to 52 Mc. (1.5:1 VSWR or less)
5.98 dBi (3.8 dBd)
-33 dB (Horizontal)
-22 dB (Vertical)
1.7:1 (50 Mc. to 54 Mc.)
1.5KW PEP
50
ohms
Horizontal or Vertical
35 inches
5.0 lbs
1" to 1-3/4" capacity
0.87 sq ft Horizontal
1.00 sq ft Vertical
SO-239
(UHF Female)
120 MPH with 1/2" radial ice
84"
31"
47" Horizontal
19.5" Vertical
Zinc Plated
18-8 stainless steel
2.0", 6061-T6
x 1/16" wall
5/8" & 1/2", 6063-T832 double drawn aluminum
3.5KW 1:1 Maxwell ferrite choke balun
NO International orders accepted for this item.
4NEC2 calculated radiation pattern for the SE-6MB
Blue = Vertical Azimuth Pattern
2.0" 6061-T6 square aluminum boom.
Horizontally mounted SE-6MB Moxon beam antenna.
Vertically mounted SE-6MB Moxon beam antenna.
Closeup of SE-6M Moxon mounting clamp, and 1:1 Maxwell choke balun.
Measured VSWR sweep of the SE-6MB Moxon beam antenna between 49 MHz and 52 MHz. VSWR is 2:1 or less between 50 and 54 MHz.
4NEC2 calculated azimuth pattern for the SE-6M Moxon beam antenna.
SAL Electronics, LLC
The Antenna Store & More
SE-6MB, 6 Meter Moxon Antenna, 1.5 KW, UHF Connector
Plus S&H and any state sales tax
Typical SE-6MB VSWR plot. (RED Line) VSWR bandwidth is less than 1.3:1 from 50 Mc. to 52 Mc.