SE-2MB: 2 Meter Moxon Beam Antenna
Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
The SE-2MB, 2-Meter Moxon Beam covers 144 to 148 Mc. at 1.5:1 or less VSWR. Covers 130 Mc. to 155 Mc. at
2:1 or less VSWR providing coverage of CAP frequencies as well. Heavy Duty construction that allows 120 MPH wind survival
with 1/2" radial ice. The SE-2MB features a 1:1 Guanella ferrite torrid current balun that provides a balance
feed. Constructed of aluminum, fiberglass, UV resistant PVC, and stainless steel components for years of trouble free operation.
The SE-2MB can be mounted horizontally for best CW/SSB operation, or it can be mounted vertically for FM operation, STANDARD.
Can be used for VHF rover operation, and strong enough to be used for permanent fixed station operation as well. May be stacked
with a phasing harness for higher gain (+3 dB) fixed station applications. Equipped with a SO-239 (UHF Female), or an optional
Type-N connector.
SE-2MB Moxon Horizontally Mounted
SE-2MB Moxon Vertically Mounted
Fiberglass filled ends to prevent moisture from entering, plus provides additional mechanical strength.
1:1 Guanella current balun.
UV resistant PVC element mounting plates.
Specifications
Electrical:
Frequency:
Forward Gain:
Front-to-Back:
Maximum VSWR:
Power Limit:
Impedance:
Polarization:
Mechanical:
Boom
Length:
Assembled Weight:
Mounting Clamp:
SQ. Surface Area:
Cable Connector:
Wind Survival:
Element Width:
Element Depth:
Turning Radius:
Hardware:
Mounting
Clamps:
Screws and nuts:
Boom:
Elements:
Balun:
130 Mc. to 154 Mc.
5.86dBi (3.7 dBd)
-33 dB (Horizontal)
-22 dB (Vertical)
1.3:1 (144 Mc. to 148 Mc.)
500W PEP
50 ohms
Horizontal
or Vertical
18 inches
3.0 lbs
1" to 1.75" capacity
0.3 sq ft Horizontal
0.35 sq ft Vertical
SO-239 (UHF
Female), Type-N optional
120 MPH with 1/2" radial ice
27"
12"
22" Horizontal
16.5" Vertical
Zinc Plated
18-8 stainless steel
18"
x 1.5", 6061-T6 x 1/8" wall
3/8" & 1/2", 6063-T832 double drawn aluminum
1:1 Guanella Current balun in ABS box
$110.00
SE-2MBU, 2-Meter Moxon with UHF connector
plus S&H and any applicable state sales tax
SE-2MBN, 2-Meter Moxon with Type-N connector
Plus S&H and any applicable state sales tax
4NEC2 calculated radiation pattern for the SE-2MB
RED = Horizontal Azimuth Pattern
BLUE = Vertical Azimuth Pattern
© 2010 - 2019 - SAL Electronics, LLC, Algonquin, IL 60102
Fiberglass element spacers provide maximum insulation and mechanical support.
Heavy-Duty 1-1/2", 6061-T6 square aluminum boom.
SE2MB Moxon beam antenna in the horizontal mounted position.
SE2MB Moxon beam antenna shown mounted in vertical position.
Closeup of the SE2MB mount showing the Guanella 1:1 current balun in ABS plastic housing.
SE-2M Moxon beam calculated plot of Horizontal and Vertical Azimuth patterns.
SAL Electronics, LLC
The Antenna Store & More
Typical VSWR curve for SE-2MB antenna. VSWR bandwidth is less than 1.5:1 from 144 to 148 MHz
VSWR (RED Line) sweep of the SE-2MB Moxon beam antenna between 140 Mc. and 150 Mc.
NO International orders accepted for this item.